🌐 Internet Verified (Unverified by Owner): Controls have been validated using official web MIDI specifications (under CC BY-SA 4.0 via MIDI.guide), but not tested on physical hardware. Help us verify them by adjusting the sliders!

Profile ID: novation-circuit-mono-station

Circuit Mono Station

Polyphonymono

Engine Typemono

Voice Count1 Voice

Timbral Parts1 Part

The Novation Circuit Mono Station is a paraphonic analog synthesizer based on the Bass Station II engine, featuring grid sequencing, multi-destination modulation matrix, patch flip, and 3 distortion modes. It supports high-resolution 8-bit parameter control via paired MSB/LSB CC numbers.

💡 How to configure the Novation Circuit Mono Station MIDI Editor▼

To control your Novation Circuit Mono Station from your web browser, connect your synth to your computer using a USB cable or a dedicated USB-to-MIDI interface.

Open the MIDI Settings panel above, set the Output Port to your connected Circuit Mono Station device, and select the correct MIDI channel (default is channel 1). Once configured, you can map the MIDI CC layout sliders, draw automated parameter curves, and edit patches in real-time without installing any software.

Virtual MIDI Controller

Tweak controls to generate and route MIDI CC packages.

MIDI Hardware Device

Midi Ch

Test Trigger

Actions

Mixer

(3 controls)

Osc 1 Level (CC 20/52)0

Adjusts the mixer level of Oscillator 1 (8-bit CC: MSB 20, LSB 52).

Osc 2 Level (CC 21/53)0

Adjusts the mixer level of Oscillator 2 (8-bit CC: MSB 21, LSB 53).

Distortion Level (CC 94)0

Controls the amount of analog distortion applied to the signal.

Oscillator 1

(1 control)

Osc 1 Coarse (CC 27/59)0

Adjusts the coarse tuning of Oscillator 1 (8-bit CC: MSB 27, LSB 59).

Filter

(2 controls)

Filter Frequency (CC 16/48)0

Adjusts the filter cutoff frequency (8-bit CC: MSB 16, LSB 48).

Filter Resonance (CC 71)0

Adjusts the filter resonance peak.

Envelopes

(4 controls)

Envelope Attack (CC 90)0

Controls the attack phase of the envelope.

Envelope Decay (CC 91)0

Controls the decay phase of the envelope.

Envelope Sustain (CC 92)0

Controls the sustain level of the envelope.

Envelope Release (CC 93)0

Controls the release phase of the envelope.

ℹ️ How MIDI CC Sync Works

MIDI CC is a one-way push protocol. Synthesizers cannot be queried dynamically to read their current parameter values. To synchronize these sliders, select your synthesizer's MIDI Input Port above. When you physically tweak knobs on your synth, the slider positions will instantly update on-screen to match.

No presets found for this synth.

ACADEMY

Recommended lessons.

Browse all lessons →

BasslineIntermediate

Suggest Profile Edit

Suggest adjustments to descriptions and MIDI CC parameter mapping.

Circuit Mono Station

Virtual MIDI Controller

Mixer

Oscillator 1

Filter

Envelopes

Recommended lessons.

Crafting an Acid Bassline

Sequencing the Rolling Bass Pattern

Sequencing a Motown Soul Bassline

Deconstructing the 80s Trance Riff

Suggest Profile Edit